3.5KW 8A to 16A Switchable Type 2 Portable EV Charger
3.5KW 8A to 16A Switchable Type 2 Portable EV Charger Application
As part of their work, people who drive long distances may find it useful to carry a portable electric vehicle charger. For most drivers, this idea is very good. If it is in the scope of daily life, it is best to ensure that the conventional system is adopted to ensure that the vehicle is in the maximum charge state as much as possible, but if a portable EV charger is always available, it may provide some peace of mind when driving. However, electric charging stations are necessary, for example, an app can identify public charging points in any given area. By paying attention to fuel consumption as the driver pays attention to the gasoline gauge, there is no reason to worry about cruising range.
The good news is that many car and breakdown organizations are beginning to equip their service vehicles with portable electric car chargers. In this way, in extreme cases, the driver knows that his supplier can provide power on the side of the road, just as they use a tank to power gasoline or diesel cars, allowing stranded drivers to get on the road again. As the use of electric vehicles increases, it seems likely that garages and dealers will regularly add portable electric vehicle chargers to their service vehicles. Similarly, car rental suppliers can provide them to customers in emergencies, and commercial users can use portable electric vehicle chargers as an important part of on-board fleet equipment to ensure that their vehicles can be charged normally or return to base.
3.5KW 8A to 16A Switchable Type 2 Portable EV Charger Features
Make charging appoinment
Full control of the charge
Easy to transport
Real time information
Maximum adaptability
Over Voltage protection
Under Voltage protection
Over Current protection
Residual current protection
Ground protection
Over Temperature protection
Surge protection
Charging gun IP67/Control Box IP67
Type A or Type B Leakage protection
5 Years warranty time
3.5KW 8A to 16A Switchable Type 2 Portable EV Charger Product Specification
3.5KW 8A to 16A Switchable Type 2 Portable EV Charger Product Specification
Input Power |
|
Charging model/case type |
Mode 2, case B |
Rated input voltage |
250VAC |
Phase number |
Single-phase |
Standards |
IEC62196-2014, IEC61851-2017 |
Output current |
8A 10A 13A 16A |
Output Power |
3.5KW |
Environment |
|
Operation temperature |
﹣30°C to 50°C |
Storage |
﹣40°C to 80°C |
Maximum altitude |
2000m |
IP code |
Charging gun IP67/Control Box IP67 |
REACH SVHC |
Lead 7439-92-1 |
RoHS |
Environmental protection service life= 10; |
Electrical characteristics |
|
Charging current adjustable |
8A 10A 13A 16A |
Charging appointment time |
Delay 0~2~4~6~8 hours |
Signal transmission type |
PWM |
Precautions in connection method |
Crimp connection, do not disconnect |
Withstand voltagece |
2000V |
Insulation resistance |
>5MΩ ,DC500V |
Contact impedancece: |
0.5 mΩ Max |
RC resistance |
680Ω |
Leakage protection current |
≤23mA |
Leakage protection action time |
≤32ms |
Standby power consumption |
≤4W |
Protection temperature inside the charging gun |
≥185℉ |
Over temperature recovery temperature |
≤167℉ |
Interface |
Display screen, LED indicator light |
Cool ing Me thod |
Natural Cooling |
Relay switch life |
≥10000 times |
Europe standard plug |
SCHUKO 16A or others |
Locking type |
Electronic locking |
Mechanical properties |
|
Connector Insertion times |
>10000 |
Connector Insertion force |
<80N |
Connector Pull-out force |
<80N |
Shell material |
Plastic |
Fireproof grade of rubber shell |
UL94V-0 |
Contact material |
Copper |
Seal material |
rubber |
Flame retardant grade |
V0 |
Contact surface material |
Ag |
Cable Specification |
|
Cable structure |
3 x 2.5mm² + 2 x0.5mm²(Reference ) |
Cable standards |
IEC 61851-2017 |
Cable authentication |
UL/TUV |
Cable outer diameter |
10.5mm ±0.4 mm(Reference ) |
Cable Type |
Straight type |
Outer sheath material |
TPE |
Outer jacket color |
Black/orange(Reference ) |
Minimum bending radius |
15 x diameter |
Package |
|
Product weight |
2.8KG |
Qty per Pizza box |
1PC |
Qty per Paper carton |
5PCS |
Dimension (LXWXH) |
470mmX380mmX410mm |