Four Charging Guns DC Fast EV Charger
Four Charging Guns DC Fast EV Charger Application
CHINAEVSE™️Four Guns DC charger can meets many requirements of connectors, such as CCS combo 2, chademo, CCS combo 1, and IEC62196 type 2. It can also charge 4 cars simultaneously, and also have the load balancing function that can distribute the power evenly to the guns. For example, take 120kw dc charger for an example, if you use 4 guns, then each output power is 30kw, if 2 guns, then each output power is 60kw, it also impacted by batteries demand of car. If batteries' voltage can not reach up to the 60kw's voltage, then dc charger's connector can not be 60kw output.This dc charger is configured with 4*20kw dc guns, 80kw in total. AC gun and DC gun can also be integrated together. which generally installed on the highway next to the charging station, bus station, large parking lot.
Four Charging Guns DC Fast EV Charger Features
Over Voltage protection
Under Voltage protection
Over Current protection
Residual Current protection
Surge protection
Short Circuit protection
Earth fault at input and output
Input phase reversal
Emergency shut-down with alarm
Over Temperature protection
5 Years warranty time
OCPP 1.6 support
Four Charging Guns DC Fast EV Charger Product Specification
Four Charging Guns DC Fast EV Charger Product Specification
Outlet Specifications |
|||
Connection standard |
CCS Combo2 (IEC 61851-23) |
CHAdeMO 1.2 |
IEC 61851-1 |
Connector/socket type |
IEC62196-3 CCS Combo2 Mode 4 |
CHAdeMO Mode 4 |
IEC 62196-2 Type 2 Mode 3 |
Vehicle Safety Communication |
CCS Combo2 – IEC 61851-23 over PLC |
CHAdeMO – JEVS G105 over CAN |
IEC 61851-1 PWM (AC Type 2) |
System output voltage range |
150-500VDC |
400/415VAC |
|
Number of output interface configuration modules |
21kW×3 |
21kW×3 |
22kW×1 |
Connector maximum output current |
150A |
125A |
32A |
Communication interface |
PLC |
CAN |
PWM |
Cable length |
5m |
5m |
5m |
Dimensions (D x W x H) |
600×690×1500 mm |
||
Input Specifications |
|||
AC Supply System |
Three-Phase, 5 Wire AC system (3Ph.+N+PE) |
||
Input Voltage (AC) |
3Ø, 260~530VAC |
||
Input Frequency |
50Hz±10Hz |
||
Input Supply Failure backup | Battery backup for minimum 1 hour for the control system and billing unit. Data logs should be synchronized with CMS during back up time, in case battery drains out |
||
Environment Parameter |
|||
Applicable Scene |
Indoor/Outdoor |
||
Operating temperature |
﹣20°C to 50°C(de-rating characteristic applies)Option:﹣20°C to 50°C |
||
Storage Temperature |
﹣40°C to 70°C |
||
Maximum altitude |
Up to 2000m |
||
Operating humidity |
≤95% non-condensing |
||
Acoustic noise |
<65dB |
||
Maximum altitude |
Up to 2000m |
||
Cooling method |
Air cooled |
||
Protection level |
IP54,IP10 |
||
Power Module |
|||
Max Output Power per Module |
21kW |
||
Max Output Current per Module |
50A |
||
Output voltage range for each module |
150-500VDC |
||
Converter Efficiency |
Maximum efficiency >95% |
||
Power facto |
Rated output load PF ≥ 0.99 |
||
Voltage regulation accuracy |
≤±0.5% |
||
Current sharing accuracy |
≤±0.5% |
||
Steady flow accuracy |
≤±1% |
||
Feature Design |
|||
Interaction Display |
Full-color (7 in 800x480 TFT ) LCD display for driver interaction |
||
Payments |
Smart Card, Server based Online Payments or equivalent |
||
Network connection |
GSM / CDMA / 3G modem, 10/100 Base-T Ethernet |
||
Communication Protocol |
OCPP1.6(optional) |
||
Visual Indicators |
Error indication, Presence of input supply indication, Charge process indication and other relevant information |
||
Push Button |
Mushroom type emergency stop switch (Red) |
||
RFID system |
ISO/IEC14443A/B, ISO/IEC15693, FeliCa™ 1, NFC reader mode, LEGIC Prime & Advant |
||
Safe Protection |
|||
Protection | Over current, under voltage, over voltage, Residual current, Surge protection, Short circuit, Earth fault at input and output, Input phase reversal, Emergency shut-down with alarm, Over temperature, Protection against electric shock |